The Mapei Type 1 Tile Adhesive is an excellent alternative to thin-set mortar. This adhesive will work for tiling the interior of your house.
You can directly use this ready-mixed adhesive, as it comes in the ready–to–go format.
If you plan to renovate your home and search for a pre-mixed tile adhesive, then Mapei Type 1 will be an excellent option.
In this blog, you will learn about Mapei Type 1 adhesive.
Apply Mapei Type 1 Tile Adhesive evenly on the clean substrate using a notched trowel. Lay the tiles on the adhesive and align them properly. Remove the excess glue on the tile using a damp cloth. Provide expansion joints and allow the adhesive to cure for around 24 hours.
Continue reading the article to learn more exciting facts about Mapei Type 1 Tile Adhesive.
About Mapei Type 1 Tile Adhesive
Is this the first time you heard about Mapei Type 1 Tile Adhesive?
Mapei is one of the most popular brands that produce high-quality tile adhesives. “Type 1” indicates that this product is professional-grade.
This adhesive is traditional and non-flammable. You can use this tile adhesive, especially on porcelain and ceramic tiles.
Also, using this tile glue, you can bond tiles to the wall and the floor. As mentioned, you can only use this for indoor tiling as it is designed for the interior only.
Mapei Type 1 Tile Adhesive: How to Use
Mapei Type 1 is a ready-mixed tile adhesive with a shelf life of 6 months to 1 year. An opened gallon of this ready-mixed adhesive will last around nine months if it is stored properly.
If you are using this adhesive for the first time, follow the instructions below.
Step 1
You will find the application instructions on the product label or the catalogue. It is essential to read and understand them before using this adhesive.
Step 2
Use the correct notched trowel to cover at least 80% of the tile back.
Step 3
Clean the substrate where you will be tiling and apply the adhesive to the substrate using the notched side of the trowel.
Apply in one direction and evenly spread the adhesive.
Note: Do not cover the entire wall or floor at the same time with the tile adhesive. This will cause the glue to dry. Hence, apply to a region that you can cover in 30 minutes.
Step 4
Now you can start bonding the tiles to the substrate.
Place the tile on the adhesive and push it back and forth. The fresh Mapei Type 1 adhesive will help to bond the tiles to their substrates strongly.
You must lift a few tiles periodically to ensure the grip is firm.
Step 5
Before the adhesive dries, align the tiles properly.
Step 6
Using a damp cloth, clean the adhesive smudged on the face of the tiles.
Step 7
According to the guidelines, provide expansion and control joints.
Step 8
Cleaning the hands and tools with water before the adhesive dries will help to remove the glue quickly.
Step 9
Wait until the adhesive has dried well. This may take around 24 hours. Once the glue is completely cured, you can start grouting.
Important: Suppose you are applying this adhesive to a cool and moist area; the curing time will be longer.
Where to Use Mapei Type 1 Tile Adhesive
It is also essential to know where you can use this adhesive.
As mentioned, you can use the Mapei Type 1 adhesive on ceramic and porcelain glazed or unglazed tiles. It is also suitable for bonding porcelain and ceramic mosaics. Using this glue, you can tile the interior walls and floors. This glue is perfect for adhering 6 x 6 inch tiles to the floor and 12 x 12 inch tiles to the walls.
Further, this adhesive works well in intermittently wet conditions. Hence, you can use the Mapei Type 1 Tile Adhesive when tiling the tub or shower.
Note: Use this adhesive at temperatures between 45 oF and 95 oF.
Benefits of Using Mapei Type 1 Tile Adhesive
There are several benefits that you can obtain by using this adhesive. Following are a few of those advantages.
- You can firmly bond tiles up to 12 by 12 inches. The grip is firm and long-lasting.
- Low VOCs and odor. Since it has a low odor working with this adhesive will not make you feel unpleasant.
- The adhesive is smooth and easy to spread. Hence, you can evenly distribute the glue to the substrate using the notched trowel.
- Mapei Type 1 adhesive has an extended open time.
- Further, it also helps to contribute to the LEED points.
Limitations of Using Mapei Type 1 Tile Adhesive
Apart from the benefit, this product also has a few limitations.
- You cannot use this adhesive on substrates containing asbestos.
- Refrain from using this tile adhesive on any dimensionally unstable substrates. For example, gypsum floor-patching compounds, metal, luan, etc.
- This adhesive is not recommended for exterior tiling, steam rooms, or places subject to water immersion.
- This product is inappropriate for setting natural stone, bathroom fixtures, or grab bars.
Substrate Suitable for Mapei Type 1 Tile Adhesive Application
Since you cannot apply this adhesive to all substrates, it is better to understand the suitable substrates. You can use this product when working on the following substrates:
- Masonry block
- Interior drywalls
- Interior floors and countertops in dry areas
- Cement backer units
- Fully cured concrete
Note: Although the above substrate is suitable for applying Mapei adhesive, it depends on the tiles you will install.
Bottom Line
Now you understand Mapei Type 1 Tile Adhesive. Where you can use this product, the suitable substrate, and how to use it are some important sections covered in this blog.
Moreover, you will also find some information about the benefits and limitations of using this tile adhesive.
So far, because you have a solid understanding of the product, we hope you will apply it to the right project and see great results.
We hope the article was informative!
FAQs
Can I Use Mapei Type 1 Adhesive to Glue Linoleum?
Yes, you can use it to glue linoleum. Since this glue is smooth and bonds well, you can use it to install linoleum tiles.
Can You Use Mapei Type 1 Adhesive for Exterior Tiling Projects?
No, it is not suitable for exterior tiling projects. In contrast, it works well for indoor tile installation.
How Long Does This Adhesive Take to Cure?
It takes around 24 to 48 hours to cure fully. In moist areas, it may take longer. Therefore, when tiling shower walls using this adhesive, ensure to wait approximately 72 hours.